esphome:
  name: esphome-web-e28960
  friendly_name: Living Room Sensor
  min_version: 2025.5.0
  name_add_mac_suffix: false

  # Boot sequence - start with WiFi connecting effect
  on_boot:
    - priority: 600
      then:
        - logger.log: "Device booting, starting WiFi connection"
        - light.turn_on:
            id: status_led
            effect: "wifi_connecting"

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: esp-idf
    sdkconfig_options:
      CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: "y"
      CONFIG_ESP32S3_DATA_CACHE_64KB: "y"
      CONFIG_ESP32S3_DATA_CACHE_LINE_64B: "y"
      CONFIG_AUDIO_BOARD_CUSTOM: "y"

psram:
  mode: octal
  speed: 80MHz

# Enable logging
logger:

# UART configuration for LD2420 mmWave sensor
uart:
  tx_pin: GPIO17
  rx_pin: GPIO16
  baud_rate: 115200
  parity: NONE
  stop_bits: 1

# Enable Home Assistant API
api:
  encryption:
    key: "ZGLTCJYjvXIJA0LIP8o/k9Vp+Tia9AhHgXZ/WHCQ1gQ="

  # API connection event handlers
  on_client_connected:
    - logger.log: "Home Assistant API connected"
    - light.turn_off: status_led

  on_client_disconnected:
    - logger.log: "Home Assistant API disconnected"
    - light.turn_on:
        id: status_led
        effect: "ha_connecting"

# Allow Over-The-Air updates
ota:
  - platform: esphome
    password: !secret ota_password

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # WiFi connection event handlers
  on_connect:
    - logger.log: "WiFi connected, attempting Home Assistant connection"
    - light.turn_on:
        id: status_led
        effect: "ha_connecting"

  on_disconnect:
    - logger.log: "WiFi disconnected"
    - light.turn_on:
        id: status_led
        effect: "wifi_connecting"

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Living-Room-Sensor Hotspot"
    password: !secret ota_password

# Status LED configuration
light:
  - platform: esp32_rmt_led_strip
    id: status_led
    name: "Status LED"
    pin: GPIO48
    num_leds: 1
    chipset: ws2812
    rgb_order: GRB
    effects:
      # Yellow blinking during WiFi connection
      - strobe:
          name: "wifi_connecting"
          colors:
            - state: true
              brightness: 80%
              red: 100%
              green: 100%
              blue: 0%
              duration: 500ms
            - state: false
              duration: 500ms
      # Orange blinking during Home Assistant connection
      - strobe:
          name: "ha_connecting"
          colors:
            - state: true
              brightness: 80%
              red: 100%
              green: 65%
              blue: 0%
              duration: 300ms
            - state: false
              duration: 300ms

button:
  - platform: restart
    name: "Restart Sensor"
    id: restart_button

  - platform: ld2420
    apply_config:
      name: Apply Config
    factory_reset:
      name: Factory Reset
    restart_module:
      name: Restart Module
    revert_config:
      name: Undo Edits

# DHT-22 Temperature and Humidity Sensor
sensor:
  - platform: dht
    pin: GPIO4
    model: DHT22
    temperature:
      name: "Living Room Temperature"
      id: living_room_temperature
    humidity:
      name: "Living Room Humidity"
      id: living_room_humidity
    update_interval: 60s

  - platform: ld2420
    moving_distance:
      name: Moving Distance

# LD2420 Presence Sensor
ld2420:

text_sensor:
  - platform: ld2420
    fw_version:
      name: LD2420 Firmware

binary_sensor:
  - platform: ld2420
    has_target:
      name: Presence

select:
  - platform: ld2420
    operating_mode:
      name: Operating Mode

number:
  - platform: ld2420
    presence_timeout:
      name: Detection Presence Timeout
    min_gate_distance:
      name: Detection Gate Minimum
    max_gate_distance:
      name: Detection Gate Maximum
    # See "Number" section below for detail
    gate_select:
      name: Select Gate to Set
    still_threshold:
      name: Set Still Threshold Value
    move_threshold:
      name: Set Move Threshold Value