Port a few more options to zenity and separate dwm from the install script

config-files/.Xresources

@@ -0,0 +1,5 @@
+# Change Xorg display scaling if needed.
+
+# Xft.dpi: 192  # 200% Scale
+# Xft.dpi: 160  # 166% Scale
+# Xft.dpi: 96   # Default

config-files/.bashrc

@@ -0,0 +1,100 @@
+export EDITOR="nvim";
+export PS1="\n[\[\e[37m\]\u\[\e[0m\]@\[\e[37;2m\]\h\[\e[0m\]] \[\e[1m\]\w \[\e[0;2m\]J:\[\e[0m\]\j\n\$ ";
+
+extract() {
+  if [ -f $1 ]; then
+    case $1 in
+    *.tar.bz2) tar xjf $1 ;;
+    *.tar.gz) tar xzf $1 ;;
+    *.bz2) bunzip2 $1 ;;
+    *.rar) unrar e $1 ;;
+    *.gz) gunzip $1 ;;
+    *.tar) tar xf $1 ;;
+    *.tbz2) tar xjf $1 ;;
+    *.tgz) tar xzf $1 ;;
+    *.zip) unzip $1 ;;
+    *.Z) uncompress $1 ;;
+    *.7z) 7z x $1 ;;
+    *) echo "'$1' cannot be extracted via extract()" ;;
+    esac
+  else
+    echo "'$1' is not a valid file"
+  fi
+}
+
+pushall() {
+  if [[ -z "$1" ]]; then
+    echo "Usage: pushall \"commit message\""
+  else
+    git pull
+    git diff
+    read -p "Press ENTER to continue..."
+    git add -A
+    git commit -m "$@"
+    git push
+  fi
+}
+
+hex2color(){
+    hex=${1#"#"}
+    r=$(printf '0x%0.2s' "$hex")
+    g=$(printf '0x%0.2s' ${hex#??})
+    b=$(printf '0x%0.2s' ${hex#????})
+    printf '%03d' "$(( (r<75?0:(r-35)/40)*6*6 +
+                       (g<75?0:(g-35)/40)*6   +
+                       (b<75?0:(b-35)/40)     + 16 ))"
+}
+
+color2hex(){
+    dec=$(($1%256))   ### input must be a number in range 0-255.
+    if [ "$dec" -lt "16" ]; then
+        bas=$(( dec%16 ))
+        mul=128
+        [ "$bas" -eq "7" ] && mul=192
+        [ "$bas" -eq "8" ] && bas=7
+        [ "$bas" -gt "8" ] && mul=255
+        a="$((  (bas&1)    *mul ))"
+        b="$(( ((bas&2)>>1)*mul ))"
+        c="$(( ((bas&4)>>2)*mul ))"
+        printf 'dec= %3s basic= #%02x%02x%02x\n' "$dec" "$a" "$b" "$c"
+    elif [ "$dec" -gt 15 ] && [ "$dec" -lt 232 ]; then
+        b=$(( (dec-16)%6  )); b=$(( b==0?0: b*40 + 55 ))
+        g=$(( (dec-16)/6%6)); g=$(( g==0?0: g*40 + 55 ))
+        r=$(( (dec-16)/36 )); r=$(( r==0?0: r*40 + 55 ))
+        printf 'dec= %3s color= #%02x%02x%02x\n' "$dec" "$r" "$g" "$b"
+    else
+        gray=$(( (dec-232)*10+8 ))
+        printf 'dec= %3s  gray= #%02x%02x%02x\n' "$dec" "$gray" "$gray" "$gray"
+    fi
+}
+
+# Commands that should be applied only for interactive shells.
+[[ $- == *i* ]] || return
+
+HISTFILESIZE=100000
+HISTSIZE=10000
+
+shopt -s histappend
+shopt -s checkwinsize
+shopt -s extglob
+shopt -s globstar
+shopt -s checkjobs
+
+alias l='ls -alh'
+alias ls='ls --color=auto'
+alias grep='grep --color=auto'
+alias ll='ls -lhi'
+alias ta='tmux attach'
+alias t='tmux'
+alias v='nvim'
+alias cpp='rsync -ah --progress'
+
+set completion-ignore-case On
+
+# Use bash-completion, if available
+[[ $PS1 && -f /usr/share/bash-completion/bash_completion ]] && \
+    . /usr/share/bash-completion/bash_completion
+
+export OFLAGS="--ozone-platform-hint=auto"
+
+export PATH=$PATH:/home/trude/.local/bin

config-files/.config/dunst/dunstrc

@@ -0,0 +1,436 @@
+# See dunst(5) for all configuration options
+
+[global]
+    ### Display ###
+
+    # Which monitor should the notifications be displayed on.
+    monitor = 0
+
+    # Display notification on focused monitor.  Possible modes are:
+    #   mouse: follow mouse pointer
+    #   keyboard: follow window with keyboard focus
+    #   none: don't follow anything
+    #
+    # "keyboard" needs a window manager that exports the
+    # _NET_ACTIVE_WINDOW property.
+    # This should be the case for almost all modern window managers.
+    #
+    # If this option is set to mouse or keyboard, the monitor option
+    # will be ignored.
+    follow = mouse
+
+    ### Geometry ###
+
+    # dynamic width from 0 to 300
+    # width = (0, 300)
+    # constant width of 300
+    width = 400
+
+    # The maximum height of a single notification, excluding the frame.
+    height = 400
+
+    # Position the notification in the top right corner
+    origin = top-center
+
+    # Offset from the origin
+    offset = 10x10
+
+    # Scale factor. It is auto-detected if value is 0.
+    scale = 0
+
+    # Maximum number of notification (0 means no limit)
+    notification_limit = 4
+
+    ### Progress bar ###
+
+    # Turn on the progess bar. It appears when a progress hint is passed with
+    # for example dunstify -h int:value:12
+    progress_bar = true
+
+    # Set the progress bar height. This includes the frame, so make sure
+    # it's at least twice as big as the frame width.
+    progress_bar_height = 10
+
+    # Set the frame width of the progress bar
+    progress_bar_frame_width = 1
+
+    # Set the minimum width for the progress bar
+    progress_bar_min_width = 150
+
+    # Set the maximum width for the progress bar
+    progress_bar_max_width = 300
+
+
+    # Show how many messages are currently hidden (because of
+    # notification_limit).
+    indicate_hidden = yes
+
+    # The transparency of the window.  Range: [0; 100].
+    # This option will only work if a compositing window manager is
+    # present (e.g. xcompmgr, compiz, etc.). (X11 only)
+    transparency = 15
+
+    # Draw a line of "separator_height" pixel height between two
+    # notifications.
+    # Set to 0 to disable.
+    separator_height = 1
+
+    # Padding between text and separator.
+    padding = 8
+
+    # Horizontal padding.
+    horizontal_padding = 10
+
+    # Padding between text and icon.
+    text_icon_padding = 0
+
+    # Defines width in pixels of frame around the notification window.
+    # Set to 0 to disable.
+    frame_width = 2
+
+    # Defines color of the frame around the notification window.
+    frame_color = "#ebdbb2"
+
+    # Define a color for the separator.
+    # possible values are:
+    #  * auto: dunst tries to find a color fitting to the background;
+    #  * foreground: use the same color as the foreground;
+    #  * frame: use the same color as the frame;
+    #  * anything else will be interpreted as a X color.
+    separator_color = frame
+
+    # Sort messages by urgency.
+    sort = yes
+
+    # Don't remove messages, if the user is idle (no mouse or keyboard input)
+    # for longer than idle_threshold seconds.
+    # Set to 0 to disable.
+    # A client can set the 'transient' hint to bypass this. See the rules
+    # section for how to disable this if necessary
+    idle_threshold = 120
+
+    ### Text ###
+
+    font = JetBrains Mono Nerd Font 10
+
+    # The spacing between lines.  If the height is smaller than the
+    # font height, it will get raised to the font height.
+    line_height = 0
+
+    # Possible values are:
+    # full: Allow a small subset of html markup in notifications:
+    #        <b>bold</b>
+    #        <i>italic</i>
+    #        <s>strikethrough</s>
+    #        <u>underline</u>
+    #
+    #        For a complete reference see
+    #        <https://developer.gnome.org/pango/stable/pango-Markup.html>.
+    #
+    # strip: This setting is provided for compatibility with some broken
+    #        clients that send markup even though it's not enabled on the
+    #        server. Dunst will try to strip the markup but the parsing is
+    #        simplistic so using this option outside of matching rules for
+    #        specific applications *IS GREATLY DISCOURAGED*.
+    #
+    # no:    Disable markup parsing, incoming notifications will be treated as
+    #        plain text. Dunst will not advertise that it has the body-markup
+    #        capability if this is set as a global setting.
+    #
+    # It's important to note that markup inside the format option will be parsed
+    # regardless of what this is set to.
+    markup = full
+
+    # The format of the message.  Possible variables are:
+    #   %a  appname
+    #   %s  summary
+    #   %b  body
+    #   %i  iconname (including its path)
+    #   %I  iconname (without its path)
+    #   %p  progress value if set ([  0%] to [100%]) or nothing
+    #   %n  progress value if set without any extra characters
+    #   %%  Literal %
+    # Markup is allowed
+    format = "%s %p\n%b"
+
+    # Alignment of message text.
+    # Possible values are "left", "center" and "right".
+    alignment = center
+
+    # Vertical alignment of message text and icon.
+    # Possible values are "top", "center" and "bottom".
+    vertical_alignment = center
+
+    # Show age of message if message is older than show_age_threshold
+    # seconds.
+    # Set to -1 to disable.
+    show_age_threshold = 60
+
+    # Specify where to make an ellipsis in long lines.
+    # Possible values are "start", "middle" and "end".
+    ellipsize = middle
+
+    # Ignore newlines '\n' in notifications.
+    ignore_newline = no
+
+    # Stack together notifications with the same content
+    stack_duplicates = true
+
+    # Hide the count of stacked notifications with the same content
+    hide_duplicate_count = false
+
+    # Display indicators for URLs (U) and actions (A).
+    show_indicators = yes
+
+    ### Icons ###
+
+    # Align icons left/right/off
+    icon_position = left
+
+    # Scale small icons up to this size, set to 0 to disable. Helpful
+    # for e.g. small files or high-dpi screens. In case of conflict,
+    # max_icon_size takes precedence over this.
+    min_icon_size = 0
+
+    # Scale larger icons down to this size, set to 0 to disable
+    max_icon_size = 64
+
+    # Paths to default icons.
+    icon_path = /usr/share/icons/gnome/16x16/status/:/usr/share/icons/gnome/16x16/devices/
+
+    ### History ###
+
+    # Should a notification popped up from history be sticky or timeout
+    # as if it would normally do.
+    sticky_history = yes
+
+    # Maximum amount of notifications kept in history
+    history_length = 20
+
+    ### Misc/Advanced ###
+
+    # dmenu path.
+    dmenu = dmenu -p dunst:
+
+    # Browser for opening urls in context menu.
+    browser = firefox -new-tab
+
+    # Always run rule-defined scripts, even if the notification is suppressed
+    always_run_script = true
+
+    # Define the title of the windows spawned by dunst
+    title = Dunst
+
+    # Define the class of the windows spawned by dunst
+    class = Dunst
+
+    # Define the corner radius of the notification window
+    # in pixel size. If the radius is 0, you have no rounded
+    # corners.
+    # The radius will be automatically lowered if it exceeds half of the
+    # notification height to avoid clipping text and/or icons.
+    corner_radius = 0
+
+    # Ignore the dbus closeNotification message.
+    # Useful to enforce the timeout set by dunst configuration. Without this
+    # parameter, an application may close the notification sent before the
+    # user defined timeout.
+    ignore_dbusclose = false
+
+    ### Wayland ###
+    # These settings are Wayland-specific. They have no effect when using X11
+
+    # Uncomment this if you want to let notications appear under fullscreen
+    # applications (default: overlay)
+    # layer = top
+
+    # Set this to true to use X11 output on Wayland.
+    force_xwayland = false
+
+    ### Legacy
+
+    # Use the Xinerama extension instead of RandR for multi-monitor support.
+    # This setting is provided for compatibility with older nVidia drivers that
+    # do not support RandR and using it on systems that support RandR is highly
+    # discouraged.
+    #
+    # By enabling this setting dunst will not be able to detect when a monitor
+    # is connected or disconnected which might break follow mode if the screen
+    # layout changes.
+    force_xinerama = false
+
+    ### mouse
+
+    # Defines list of actions for each mouse event
+    # Possible values are:
+    # * none: Don't do anything.
+    # * do_action: Invoke the action determined by the action_name rule. If there is no
+    #              such action, open the context menu.
+    # * open_url: If the notification has exactly one url, open it. If there are multiple
+    #             ones, open the context menu.
+    # * close_current: Close current notification.
+    # * close_all: Close all notifications.
+    # * context: Open context menu for the notification.
+    # * context_all: Open context menu for all notifications.
+    # These values can be strung together for each mouse event, and
+    # will be executed in sequence.
+    mouse_left_click = close_current
+    mouse_middle_click = do_action, close_current
+    mouse_right_click = close_all
+
+# Experimental features that may or may not work correctly. Do not expect them
+# to have a consistent behaviour across releases.
+[experimental]
+    # Calculate the dpi to use on a per-monitor basis.
+    # If this setting is enabled the Xft.dpi value will be ignored and instead
+    # dunst will attempt to calculate an appropriate dpi value for each monitor
+    # using the resolution and physical size. This might be useful in setups
+    # where there are multiple screens with very different dpi values.
+    per_monitor_dpi = false
+
+
+[urgency_low]
+    # IMPORTANT: colors have to be defined in quotation marks.
+    # Otherwise the "#" and following would be interpreted as a comment.
+    background = "#282828"
+    foreground = "#ebdbb2"
+    timeout = 10
+    # Icon for notifications with low urgency, uncomment to enable
+    #new_icon = /path/to/icon
+
+[urgency_normal]
+    background = "#282828"
+    foreground = "#ebdbb2"
+    timeout = 10
+    # Icon for notifications with normal urgency, uncomment to enable
+    #new_icon = /path/to/icon
+
+[urgency_critical]
+    background = "#282828"
+    foreground = "#ebdbb2"
+    frame_color = "#fb4934"
+    timeout = 0
+    # Icon for notifications with critical urgency, uncomment to enable
+    #new_icon = /path/to/icon
+
+# Every section that isn't one of the above is interpreted as a rules to
+# override settings for certain messages.
+#
+# Messages can be matched by
+#    appname (discouraged, see desktop_entry)
+#    body
+#    category
+#    desktop_entry
+#    icon
+#    match_transient
+#    msg_urgency
+#    stack_tag
+#    summary
+#
+# and you can override the
+#    background
+#    foreground
+#    format
+#    frame_color
+#    fullscreen
+#    new_icon
+#    set_stack_tag
+#    set_transient
+#    set_category
+#    timeout
+#    urgency
+#    skip_display
+#    history_ignore
+#    action_name
+#    word_wrap
+#    ellipsize
+#    alignment
+#
+# Shell-like globbing will get expanded.
+#
+# Instead of the appname filter, it's recommended to use the desktop_entry filter.
+# GLib based applications export their desktop-entry name. In comparison to the appname,
+# the desktop-entry won't get localized.
+#
+# SCRIPTING
+# You can specify a script that gets run when the rule matches by
+# setting the "script" option.
+# The script will be called as follows:
+#   script appname summary body icon urgency
+# where urgency can be "LOW", "NORMAL" or "CRITICAL".
+#
+# NOTE: It might be helpful to run dunst -print in a terminal in order
+# to find fitting options for rules.
+
+# Disable the transient hint so that idle_threshold cannot be bypassed from the
+# client
+#[transient_disable]
+#    match_transient = yes
+#    set_transient = no
+#
+# Make the handling of transient notifications more strict by making them not
+# be placed in history.
+#[transient_history_ignore]
+#    match_transient = yes
+#    history_ignore = yes
+
+# fullscreen values
+# show: show the notifications, regardless if there is a fullscreen window opened
+# delay: displays the new notification, if there is no fullscreen window active
+#        If the notification is already drawn, it won't get undrawn.
+# pushback: same as delay, but when switching into fullscreen, the notification will get
+#           withdrawn from screen again and will get delayed like a new notification
+#[fullscreen_delay_everything]
+#    fullscreen = delay
+#[fullscreen_show_critical]
+#    msg_urgency = critical
+#    fullscreen = show
+
+#[espeak]
+#    summary = "*"
+#    script = dunst_espeak.sh
+
+#[script-test]
+#    summary = "*script*"
+#    script = dunst_test.sh
+
+#[ignore]
+#    # This notification will not be displayed
+#    summary = "foobar"
+#    skip_display = true
+
+#[history-ignore]
+#    # This notification will not be saved in history
+#    summary = "foobar"
+#    history_ignore = yes
+
+#[skip-display]
+#    # This notification will not be displayed, but will be included in the history
+#    summary = "foobar"
+#    skip_display = yes
+
+#[signed_on]
+#    appname = Pidgin
+#    summary = "*signed on*"
+#    urgency = low
+#
+#[signed_off]
+#    appname = Pidgin
+#    summary = *signed off*
+#    urgency = low
+#
+#[says]
+#    appname = Pidgin
+#    summary = *says*
+#    urgency = critical
+#
+#[twitter]
+#    appname = Pidgin
+#    summary = *twitter.com*
+#    urgency = normal
+#
+#[stack-volumes]
+#    appname = "some_volume_notifiers"
+#    set_stack_tag = "volume"
+#
+# vim: ft=cfg

config-files/.config/git/config

@@ -0,0 +1,11 @@
+[user]
+email = "ehtrude@gmail.com"
+name = "TrudeEH"
+
+[credential "https://github.com"]
+        helper =
+        helper = !/usr/bin/gh auth git-credential
+[credential "https://gist.github.com"]
+        helper =
+        helper = !/usr/bin/gh auth git-credential
+

config-files/.config/nvim/.stylua.toml

@@ -0,0 +1,6 @@
+column_width = 160
+line_endings = "Unix"
+indent_type = "Spaces"
+indent_width = 2
+quote_style = "AutoPreferSingle"
+call_parentheses = "None"

config-files/.config/nvim/doc/kickstart.txt

@@ -0,0 +1,24 @@
+================================================================================
+INTRODUCTION                                                  *kickstart.nvim*
+
+Kickstart.nvim is a project to help you get started on your neovim journey.
+
+                                                            *kickstart-is-not*
+It is not:
+- Complete framework for every plugin under the sun
+- Place to add every plugin that could ever be useful
+
+                                                                *kickstart-is*
+It is:
+- Somewhere that has a good start for the most common "IDE" type features:
+    - autocompletion
+    - goto-definition
+    - find references
+    - fuzzy finding
+    - and hinting at what more can be done :)
+- A place to _kickstart_ your journey.
+    - You should fork this project and use/modify it so that it matches your
+      style and preferences. If you don't want to do that, there are probably
+      other projects that would fit much better for you (and that's great!)!
+
+ vim:tw=78:ts=8:ft=help:norl:

config-files/.config/nvim/doc/tags

@@ -0,0 +1,3 @@
+kickstart-is	kickstart.txt	/*kickstart-is*
+kickstart-is-not	kickstart.txt	/*kickstart-is-not*
+kickstart.nvim	kickstart.txt	/*kickstart.nvim*

config-files/.config/nvim/init.lua

@@ -0,0 +1,722 @@
+vim.g.mapleader = ' '
+vim.g.maplocalleader = ' '
+vim.g.have_nerd_font = true
+
+-- NOTE: OPTIONS
+--  See `:help vim.opt`
+--  For more options, you can see `:help option-list`
+
+vim.opt.number = true -- Enable line numbers
+vim.opt.relativenumber = true -- Lines are relative (helps with jumping)
+vim.opt.mouse = 'a' -- Enable the mouse
+vim.opt.showmode = false -- Do not show mode (already in the statusline)
+vim.opt.clipboard = 'unnamedplus' -- Vim <-> OS Clipboard
+vim.opt.breakindent = true
+vim.opt.undofile = true -- Undo history
+vim.opt.ignorecase = true
+vim.opt.smartcase = true
+vim.opt.signcolumn = 'yes'
+vim.opt.updatetime = 250
+vim.opt.timeoutlen = 300
+vim.opt.splitright = true
+vim.opt.splitbelow = true
+vim.opt.list = true
+vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }
+vim.opt.inccommand = 'split' -- Preview substitutions
+vim.opt.cursorline = true
+vim.opt.scrolloff = 10
+
+-- NOTE: Basic Keymaps
+--  See `:help vim.keymap.set()`
+
+-- Set highlight on search, but clear on pressing <Esc> in normal mode
+vim.opt.hlsearch = true
+vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')
+
+-- Diagnostic keymaps
+vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous [D]iagnostic message' })
+vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next [D]iagnostic message' })
+vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Show diagnostic [E]rror messages' })
+vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })
+
+-- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
+-- for people to discover. Otherwise, you normally need to press <C-\><C-n>, which
+-- is not what someone will guess without a bit more experience.
+--
+-- This won't work in all terminal emulators/tmux/etc. Try your own mapping
+-- or just use <C-\><C-n> to exit terminal mode
+vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })
+
+-- Keybinds to make split navigation easier.
+--  Use CTRL+<hjkl> to switch between windows
+--
+--  See `:help wincmd` for a list of all window commands
+vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
+vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
+vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
+vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })
+
+-- NOTE: Basic Autocommands
+--  See `:help lua-guide-autocommands`
+
+-- Highlight when yanking (copying) text
+--  Try it with `yap` in normal mode
+--  See `:help vim.highlight.on_yank()`
+vim.api.nvim_create_autocmd('TextYankPost', {
+  desc = 'Highlight when yanking (copying) text',
+  group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }),
+  callback = function()
+    vim.highlight.on_yank()
+  end,
+})
+
+-- NOTE: Install `lazy.nvim` plugin manager
+--    See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
+local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
+if not vim.loop.fs_stat(lazypath) then
+  local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
+  vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
+end ---@diagnostic disable-next-line: undefined-field
+vim.opt.rtp:prepend(lazypath)
+
+-- NOTE: Configure and install plugins
+--
+--  To check the current status of your plugins, run
+--    :Lazy
+--
+--  You can press `?` in this menu for help. Use `:q` to close the window
+--
+--  To update plugins you can run
+--    :Lazy update
+--
+require('lazy').setup({
+  'tpope/vim-sleuth', -- Detect tabstop and shiftwidth automatically
+  { 'numToStr/Comment.nvim', opts = {} }, -- "gc" to comment visual regions/lines
+
+  { -- Adds git related signs to the gutter, as well as utilities for managing changes
+    'lewis6991/gitsigns.nvim',
+    opts = {
+      signs = {
+        add = { text = '+' },
+        change = { text = '~' },
+        delete = { text = '_' },
+        topdelete = { text = '‾' },
+        changedelete = { text = '~' },
+      },
+    },
+  },
+
+  { -- Useful plugin to show you pending keybinds.
+    'folke/which-key.nvim',
+    event = 'VimEnter', -- Sets the loading event to 'VimEnter'
+    config = function() -- This is the function that runs, AFTER loading
+      require('which-key').setup()
+
+      -- Document existing key chains
+      require('which-key').register {
+        ['<leader>c'] = { name = '[C]ode', _ = 'which_key_ignore' },
+        ['<leader>d'] = { name = '[D]ocument', _ = 'which_key_ignore' },
+        ['<leader>r'] = { name = '[R]ename', _ = 'which_key_ignore' },
+        ['<leader>s'] = { name = '[S]earch', _ = 'which_key_ignore' },
+        ['<leader>w'] = { name = '[W]orkspace', _ = 'which_key_ignore' },
+        ['<leader>t'] = { name = '[T]oggle', _ = 'which_key_ignore' },
+        ['<leader>h'] = { name = 'Git [H]unk', _ = 'which_key_ignore' },
+      }
+      -- visual mode
+      require('which-key').register({
+        ['<leader>h'] = { 'Git [H]unk' },
+      }, { mode = 'v' })
+    end,
+  },
+
+  { -- Fuzzy Finder (files, lsp, etc)
+    'nvim-telescope/telescope.nvim',
+    event = 'VimEnter',
+    branch = '0.1.x',
+    dependencies = {
+      'nvim-lua/plenary.nvim',
+      { -- If encountering errors, see telescope-fzf-native README for installation instructions
+        'nvim-telescope/telescope-fzf-native.nvim',
+
+        -- `build` is used to run some command when the plugin is installed/updated.
+        -- This is only run then, not every time Neovim starts up.
+        build = 'make',
+
+        -- `cond` is a condition used to determine whether this plugin should be
+        -- installed and loaded.
+        cond = function()
+          return vim.fn.executable 'make' == 1
+        end,
+      },
+      { 'nvim-telescope/telescope-ui-select.nvim' },
+
+      -- Useful for getting pretty icons, but requires a Nerd Font.
+      { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font },
+    },
+    config = function()
+      -- Two important keymaps to use while in Telescope are:
+      --  - Insert mode: <c-/>
+      --  - Normal mode: ?
+      -- [[ Configure Telescope ]]
+      -- See `:help telescope` and `:help telescope.setup()`
+      require('telescope').setup {
+        -- You can put your default mappings / updates / etc. in here
+        --  All the info you're looking for is in `:help telescope.setup()`
+        --
+        -- defaults = {
+        --   mappings = {
+        --     i = { ['<c-enter>'] = 'to_fuzzy_refine' },
+        --   },
+        -- },
+        -- pickers = {}
+        extensions = {
+          ['ui-select'] = {
+            require('telescope.themes').get_dropdown(),
+          },
+        },
+      }
+
+      -- Enable Telescope extensions if they are installed
+      pcall(require('telescope').load_extension, 'fzf')
+      pcall(require('telescope').load_extension, 'ui-select')
+
+      -- See `:help telescope.builtin`
+      local builtin = require 'telescope.builtin'
+      vim.keymap.set('n', '<leader>sh', builtin.help_tags, { desc = '[S]earch [H]elp' })
+      vim.keymap.set('n', '<leader>sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' })
+      vim.keymap.set('n', '<leader>sf', builtin.find_files, { desc = '[S]earch [F]iles' })
+      vim.keymap.set('n', '<leader>ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' })
+      vim.keymap.set('n', '<leader>sw', builtin.grep_string, { desc = '[S]earch current [W]ord' })
+      vim.keymap.set('n', '<leader>sg', builtin.live_grep, { desc = '[S]earch by [G]rep' })
+      vim.keymap.set('n', '<leader>sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' })
+      vim.keymap.set('n', '<leader>sr', builtin.resume, { desc = '[S]earch [R]esume' })
+      vim.keymap.set('n', '<leader>s.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' })
+      vim.keymap.set('n', '<leader><leader>', builtin.buffers, { desc = '[ ] Find existing buffers' })
+
+      -- Slightly advanced example of overriding default behavior and theme
+      vim.keymap.set('n', '<leader>/', function()
+        -- You can pass additional configuration to Telescope to change the theme, layout, etc.
+        builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown {
+          winblend = 10,
+          previewer = false,
+        })
+      end, { desc = '[/] Fuzzily search in current buffer' })
+
+      -- It's also possible to pass additional configuration options.
+      --  See `:help telescope.builtin.live_grep()` for information about particular keys
+      vim.keymap.set('n', '<leader>s/', function()
+        builtin.live_grep {
+          grep_open_files = true,
+          prompt_title = 'Live Grep in Open Files',
+        }
+      end, { desc = '[S]earch [/] in Open Files' })
+
+      -- Shortcut for searching your Neovim configuration files
+      vim.keymap.set('n', '<leader>sn', function()
+        builtin.find_files { cwd = vim.fn.stdpath 'config' }
+      end, { desc = '[S]earch [N]eovim files' })
+    end,
+  },
+
+  { -- NOTE: LSP Configuration & Plugins
+    'neovim/nvim-lspconfig',
+    dependencies = {
+      -- Automatically install LSPs and related tools to stdpath for Neovim
+      { 'williamboman/mason.nvim', config = true },
+      'williamboman/mason-lspconfig.nvim',
+      'WhoIsSethDaniel/mason-tool-installer.nvim',
+
+      -- Useful status updates for LSP.
+      -- `opts = {}` is the same as calling `require('fidget').setup({})`
+      { 'j-hui/fidget.nvim', opts = {} },
+
+      -- `neodev` configures Lua LSP for your Neovim config, runtime and plugins
+      -- used for completion, annotations and signatures of Neovim apis
+      { 'folke/neodev.nvim', opts = {} },
+    },
+    config = function()
+      vim.api.nvim_create_autocmd('LspAttach', {
+        group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }),
+        callback = function(event)
+          local map = function(keys, func, desc)
+            vim.keymap.set('n', keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc })
+          end
+
+          -- Jump to the definition of the word under your cursor.
+          --  This is where a variable was first declared, or where a function is defined, etc.
+          --  To jump back, press <C-t>.
+          map('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
+
+          -- Find references for the word under your cursor.
+          map('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')
+
+          -- Jump to the implementation of the word under your cursor.
+          --  Useful when your language has ways of declaring types without an actual implementation.
+          map('gI', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')
+
+          -- Jump to the type of the word under your cursor.
+          --  Useful when you're not sure what type a variable is and you want to see
+          --  the definition of its *type*, not where it was *defined*.
+          map('<leader>D', require('telescope.builtin').lsp_type_definitions, 'Type [D]efinition')
+
+          -- Fuzzy find all the symbols in your current document.
+          --  Symbols are things like variables, functions, types, etc.
+          map('<leader>ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols')
+
+          -- Fuzzy find all the symbols in your current workspace.
+          --  Similar to document symbols, except searches over your entire project.
+          map('<leader>ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols')
+
+          -- Rename the variable under your cursor.
+          --  Most Language Servers support renaming across files, etc.
+          map('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame')
+
+          -- Execute a code action, usually your cursor needs to be on top of an error
+          -- or a suggestion from your LSP for this to activate.
+          map('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction')
+
+          -- Opens a popup that displays documentation about the word under your cursor
+          --  See `:help K` for why this keymap.
+          map('K', vim.lsp.buf.hover, 'Hover Documentation')
+
+          -- WARN: This is not Goto Definition, this is Goto Declaration.
+          --  For example, in C this would take you to the header.
+          map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
+
+          -- The following two autocommands are used to highlight references of the
+          -- word under your cursor when your cursor rests there for a little while.
+          --    See `:help CursorHold` for information about when this is executed
+          --
+          -- When you move your cursor, the highlights will be cleared (the second autocommand).
+          local client = vim.lsp.get_client_by_id(event.data.client_id)
+          if client and client.server_capabilities.documentHighlightProvider then
+            local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false })
+            vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, {
+              buffer = event.buf,
+              group = highlight_augroup,
+              callback = vim.lsp.buf.document_highlight,
+            })
+
+            vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, {
+              buffer = event.buf,
+              group = highlight_augroup,
+              callback = vim.lsp.buf.clear_references,
+            })
+
+            vim.api.nvim_create_autocmd('LspDetach', {
+              group = vim.api.nvim_create_augroup('kickstart-lsp-detach', { clear = true }),
+              callback = function(event2)
+                vim.lsp.buf.clear_references()
+                vim.api.nvim_clear_autocmds { group = 'kickstart-lsp-highlight', buffer = event2.buf }
+              end,
+            })
+          end
+
+          -- The following autocommand is used to enable inlay hints in your
+          -- code, if the language server you are using supports them
+          --
+          -- This may be unwanted, since they displace some of your code
+          if client and client.server_capabilities.inlayHintProvider and vim.lsp.inlay_hint then
+            map('<leader>th', function()
+              vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled())
+            end, '[T]oggle Inlay [H]ints')
+          end
+        end,
+      })
+
+      -- LSP servers and clients are able to communicate to each other what features they support.
+      --  By default, Neovim doesn't support everything that is in the LSP specification.
+      --  When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities.
+      --  So, we create new capabilities with nvim cmp, and then broadcast that to the servers.
+      local capabilities = vim.lsp.protocol.make_client_capabilities()
+      capabilities = vim.tbl_deep_extend('force', capabilities, require('cmp_nvim_lsp').default_capabilities())
+
+      -- Enable the following language servers
+      --  Feel free to add/remove any LSPs that you want here. They will automatically be installed.
+      --
+      --  Add any additional override configuration in the following tables. Available keys are:
+      --  - cmd (table): Override the default command used to start the server
+      --  - filetypes (table): Override the default list of associated filetypes for the server
+      --  - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features.
+      --  - settings (table): Override the default settings passed when initializing the server.
+      --        For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
+      local servers = {
+        -- clangd = {},
+        -- gopls = {},
+        -- pyright = {},
+        -- rust_analyzer = {},
+        -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs
+        --
+        -- Some languages (like typescript) have entire language plugins that can be useful:
+        --    https://github.com/pmizio/typescript-tools.nvim
+        --
+        -- But for many setups, the LSP (`tsserver`) will work just fine
+        -- tsserver = {},
+        --
+
+        lua_ls = {
+          -- cmd = {...},
+          -- filetypes = { ...},
+          -- capabilities = {},
+          settings = {
+            Lua = {
+              completion = {
+                callSnippet = 'Replace',
+              },
+              -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings
+              -- diagnostics = { disable = { 'missing-fields' } },
+            },
+          },
+        },
+      }
+
+      -- Ensure the servers and tools above are installed
+      --  To check the current status of installed tools and/or manually install
+      --  other tools, you can run
+      --    :Mason
+      --
+      --  You can press `g?` for help in this menu.
+      require('mason').setup()
+
+      -- You can add other tools here that you want Mason to install
+      -- for you, so that they are available from within Neovim.
+      local ensure_installed = vim.tbl_keys(servers or {})
+      vim.list_extend(ensure_installed, {
+        'stylua', -- Used to format Lua code
+      })
+      require('mason-tool-installer').setup { ensure_installed = ensure_installed }
+
+      require('mason-lspconfig').setup {
+        handlers = {
+          function(server_name)
+            local server = servers[server_name] or {}
+            -- This handles overriding only values explicitly passed
+            -- by the server configuration above. Useful when disabling
+            -- certain features of an LSP (for example, turning off formatting for tsserver)
+            server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {})
+            require('lspconfig')[server_name].setup(server)
+          end,
+        },
+      }
+    end,
+  },
+
+  { -- Autoformat
+    'stevearc/conform.nvim',
+    lazy = false,
+    keys = {
+      {
+        '<leader>f',
+        function()
+          require('conform').format { async = true, lsp_fallback = true }
+        end,
+        mode = '',
+        desc = '[F]ormat buffer',
+      },
+    },
+    opts = {
+      notify_on_error = false,
+      format_on_save = function(bufnr)
+        -- Disable "format_on_save lsp_fallback" for languages that don't
+        -- have a well standardized coding style. You can add additional
+        -- languages here or re-enable it for the disabled ones.
+        local disable_filetypes = { c = true, cpp = true }
+        return {
+          timeout_ms = 500,
+          lsp_fallback = not disable_filetypes[vim.bo[bufnr].filetype],
+        }
+      end,
+      formatters_by_ft = {
+        lua = { 'stylua' },
+        -- Conform can also run multiple formatters sequentially
+        -- python = { "isort", "black" },
+        --
+        -- You can use a sub-list to tell conform to run *until* a formatter
+        -- is found.
+        -- javascript = { { "prettierd", "prettier" } },
+      },
+    },
+  },
+
+  { -- Autocompletion
+    'hrsh7th/nvim-cmp',
+    event = 'InsertEnter',
+    dependencies = {
+      -- Snippet Engine & its associated nvim-cmp source
+      {
+        'L3MON4D3/LuaSnip',
+        build = (function()
+          -- Build Step is needed for regex support in snippets.
+          -- This step is not supported in many windows environments.
+          -- Remove the below condition to re-enable on windows.
+          if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then
+            return
+          end
+          return 'make install_jsregexp'
+        end)(),
+        dependencies = {
+          -- `friendly-snippets` contains a variety of premade snippets.
+          --    See the README about individual language/framework/plugin snippets:
+          --    https://github.com/rafamadriz/friendly-snippets
+          -- {
+          --   'rafamadriz/friendly-snippets',
+          --   config = function()
+          --     require('luasnip.loaders.from_vscode').lazy_load()
+          --   end,
+          -- },
+        },
+      },
+      'saadparwaiz1/cmp_luasnip',
+
+      -- Adds other completion capabilities.
+      --  nvim-cmp does not ship with all sources by default. They are split
+      --  into multiple repos for maintenance purposes.
+      'hrsh7th/cmp-nvim-lsp',
+      'hrsh7th/cmp-path',
+    },
+    config = function()
+      -- See `:help cmp`
+      local cmp = require 'cmp'
+      local luasnip = require 'luasnip'
+      luasnip.config.setup {}
+
+      cmp.setup {
+        snippet = {
+          expand = function(args)
+            luasnip.lsp_expand(args.body)
+          end,
+        },
+        completion = { completeopt = 'menu,menuone,noinsert' },
+
+        -- For an understanding of why these mappings were
+        -- chosen, you will need to read `:help ins-completion`
+        --
+        -- No, but seriously. Please read `:help ins-completion`, it is really good!
+        mapping = cmp.mapping.preset.insert {
+          -- Select the [n]ext item
+          ['<C-n>'] = cmp.mapping.select_next_item(),
+          -- Select the [p]revious item
+          ['<C-p>'] = cmp.mapping.select_prev_item(),
+
+          -- Scroll the documentation window [b]ack / [f]orward
+          ['<C-b>'] = cmp.mapping.scroll_docs(-4),
+          ['<C-f>'] = cmp.mapping.scroll_docs(4),
+
+          -- Accept ([y]es) the completion.
+          --  This will auto-import if your LSP supports it.
+          --  This will expand snippets if the LSP sent a snippet.
+          ['<C-y>'] = cmp.mapping.confirm { select = true },
+
+          -- If you prefer more traditional completion keymaps,
+          -- you can uncomment the following lines
+          --['<CR>'] = cmp.mapping.confirm { select = true },
+          --['<Tab>'] = cmp.mapping.select_next_item(),
+          --['<S-Tab>'] = cmp.mapping.select_prev_item(),
+
+          -- Manually trigger a completion from nvim-cmp.
+          --  Generally you don't need this, because nvim-cmp will display
+          --  completions whenever it has completion options available.
+          ['<C-Space>'] = cmp.mapping.complete {},
+
+          -- Think of <c-l> as moving to the right of your snippet expansion.
+          --  So if you have a snippet that's like:
+          --  function $name($args)
+          --    $body
+          --  end
+          --
+          -- <c-l> will move you to the right of each of the expansion locations.
+          -- <c-h> is similar, except moving you backwards.
+          ['<C-l>'] = cmp.mapping(function()
+            if luasnip.expand_or_locally_jumpable() then
+              luasnip.expand_or_jump()
+            end
+          end, { 'i', 's' }),
+          ['<C-h>'] = cmp.mapping(function()
+            if luasnip.locally_jumpable(-1) then
+              luasnip.jump(-1)
+            end
+          end, { 'i', 's' }),
+
+          -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see:
+          --    https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps
+        },
+        sources = {
+          { name = 'nvim_lsp' },
+          { name = 'luasnip' },
+          { name = 'path' },
+        },
+      }
+    end,
+  },
+
+  { -- You can easily change to a different colorscheme.
+    -- Change the name of the colorscheme plugin below, and then
+    -- change the command in the config to whatever the name of that colorscheme is.
+    --
+    -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`.
+    'ellisonleao/gruvbox.nvim',
+    priority = 1000, -- Make sure to load this before all the other start plugins.
+    init = function()
+      -- Load the colorscheme here.
+      -- Like many other themes, this one has different styles, and you could load
+      -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'.
+      vim.cmd.colorscheme 'gruvbox'
+
+      -- You can configure highlights by doing something like:
+      vim.cmd.hi 'Comment gui=none'
+    end,
+  },
+
+  -- Highlight todo, notes, etc in comments
+  { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } },
+
+  { -- Collection of various small independent plugins/modules
+    'echasnovski/mini.nvim',
+    config = function()
+      -- Better Around/Inside textobjects
+      --
+      -- Examples:
+      --  - va)  - [V]isually select [A]round [)]paren
+      --  - yinq - [Y]ank [I]nside [N]ext [']quote
+      --  - ci'  - [C]hange [I]nside [']quote
+      require('mini.ai').setup { n_lines = 500 }
+
+      -- Add/delete/replace surroundings (brackets, quotes, etc.)
+      --
+      -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren
+      -- - sd'   - [S]urround [D]elete [']quotes
+      -- - sr)'  - [S]urround [R]eplace [)] [']
+      require('mini.surround').setup()
+
+      -- Simple and easy statusline.
+      --  You could remove this setup call if you don't like it,
+      --  and try some other statusline plugin
+      local statusline = require 'mini.statusline'
+      -- set use_icons to true if you have a Nerd Font
+      statusline.setup { use_icons = vim.g.have_nerd_font }
+
+      -- You can configure sections in the statusline by overriding their
+      -- default behavior. For example, here we set the section for
+      -- cursor location to LINE:COLUMN
+      ---@diagnostic disable-next-line: duplicate-set-field
+      statusline.section_location = function()
+        return '%2l:%-2v'
+      end
+
+      -- ... and there is more!
+      --  Check out: https://github.com/echasnovski/mini.nvim
+    end,
+  },
+  { -- Highlight, edit, and navigate code
+    'nvim-treesitter/nvim-treesitter',
+    build = ':TSUpdate',
+    opts = {
+      ensure_installed = { 'bash', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'vim', 'vimdoc' },
+      -- Autoinstall languages that are not installed
+      auto_install = true,
+      highlight = {
+        enable = true,
+        -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules.
+        --  If you are experiencing weird indenting issues, add the language to
+        --  the list of additional_vim_regex_highlighting and disabled languages for indent.
+        additional_vim_regex_highlighting = { 'ruby' },
+      },
+      indent = { enable = true, disable = { 'ruby' } },
+    },
+    config = function(_, opts)
+      -- [[ Configure Treesitter ]] See `:help nvim-treesitter`
+
+      -- Prefer git instead of curl in order to improve connectivity in some environments
+      require('nvim-treesitter.install').prefer_git = true
+      ---@diagnostic disable-next-line: missing-fields
+      require('nvim-treesitter.configs').setup(opts)
+
+      -- There are additional nvim-treesitter modules that you can use to interact
+      -- with nvim-treesitter. You should go explore a few and see what interests you:
+      --
+      --    - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod`
+      --    - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context
+      --    - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
+    end,
+  },
+
+  -- The following two comments only work if you have downloaded the kickstart repo, not just copy pasted the
+  -- init.lua. If you want these files, they are in the repository, so you can just download them and
+  -- place them in the correct locations.
+
+  {
+    'windwp/nvim-autopairs',
+    event = 'InsertEnter',
+    -- Optional dependency
+    dependencies = { 'hrsh7th/nvim-cmp' },
+    config = function()
+      require('nvim-autopairs').setup {}
+      -- If you want to automatically add `(` after selecting a function or method
+      local cmp_autopairs = require 'nvim-autopairs.completion.cmp'
+      local cmp = require 'cmp'
+      cmp.event:on('confirm_done', cmp_autopairs.on_confirm_done())
+    end,
+  },
+
+  {
+    'nvim-neo-tree/neo-tree.nvim',
+    version = '*',
+    dependencies = {
+      'nvim-lua/plenary.nvim',
+      'nvim-tree/nvim-web-devicons', -- not strictly required, but recommended
+      'MunifTanjim/nui.nvim',
+    },
+    cmd = 'Neotree',
+    keys = {
+      { '\\', ':Neotree reveal<CR>', { desc = 'NeoTree reveal' } },
+    },
+    opts = {
+      filesystem = {
+        window = {
+          mappings = {
+            ['\\'] = 'close_window',
+          },
+        },
+      },
+    },
+  },
+  -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for Kickstart
+  --
+  --  Here are some example plugins that I've included in the Kickstart repository.
+  --  Uncomment any of the lines below to enable them (you will need to restart nvim).
+  --
+  -- require 'kickstart.plugins.debug',
+  -- require 'kickstart.plugins.indent_line',
+  -- require 'kickstart.plugins.lint',
+  -- require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps
+
+  -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
+  --    This is the easiest way to modularize your config.
+  --
+  --  Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
+  --    For additional information, see `:help lazy.nvim-lazy.nvim-structuring-your-plugins`
+  -- { import = 'custom.plugins' },
+}, {
+  ui = {
+    -- If you are using a Nerd Font: set icons to an empty table which will use the
+    -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table
+    icons = vim.g.have_nerd_font and {} or {
+      cmd = '⌘',
+      config = '🛠',
+      event = '📅',
+      ft = '📂',
+      init = '⚙',
+      keys = '🗝',
+      plugin = '🔌',
+      runtime = '💻',
+      require = '🌙',
+      source = '📄',
+      start = '🚀',
+      task = '📌',
+      lazy = '💤 ',
+    },
+  },
+})
+
+-- The line beneath this is called `modeline`. See `:help modeline`
+-- vim: ts=2 sts=2 sw=2 et

config-files/.config/nvim/lua/custom/plugins/init.lua

@@ -0,0 +1,5 @@
+-- You can add your own plugins here or in other files in this directory!
+--  I promise not to create any merge conflicts in this directory :)
+--
+-- See the kickstart.nvim README for more information
+return {}

config-files/.config/nvim/lua/kickstart/health.lua

@@ -0,0 +1,52 @@
+--[[
+--
+-- This file is not required for your own configuration,
+-- but helps people determine if their system is setup correctly.
+--
+--]]
+
+local check_version = function()
+  local verstr = string.format('%s.%s.%s', vim.version().major, vim.version().minor, vim.version().patch)
+  if not vim.version.cmp then
+    vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr))
+    return
+  end
+
+  if vim.version.cmp(vim.version(), { 0, 9, 4 }) >= 0 then
+    vim.health.ok(string.format("Neovim version is: '%s'", verstr))
+  else
+    vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr))
+  end
+end
+
+local check_external_reqs = function()
+  -- Basic utils: `git`, `make`, `unzip`
+  for _, exe in ipairs { 'git', 'make', 'unzip', 'rg' } do
+    local is_executable = vim.fn.executable(exe) == 1
+    if is_executable then
+      vim.health.ok(string.format("Found executable: '%s'", exe))
+    else
+      vim.health.warn(string.format("Could not find executable: '%s'", exe))
+    end
+  end
+
+  return true
+end
+
+return {
+  check = function()
+    vim.health.start 'kickstart.nvim'
+
+    vim.health.info [[NOTE: Not every warning is a 'must-fix' in `:checkhealth`
+
+  Fix only warnings for plugins and languages you intend to use.
+    Mason will give warnings for languages that are not installed.
+    You do not need to install, unless you want to use those languages!]]
+
+    local uv = vim.uv or vim.loop
+    vim.health.info('System Information: ' .. vim.inspect(uv.os_uname()))
+
+    check_version()
+    check_external_reqs()
+  end,
+}

config-files/.config/nvim/lua/kickstart/plugins/debug.lua

@@ -0,0 +1,96 @@
+-- debug.lua
+--
+-- Shows how to use the DAP plugin to debug your code.
+--
+-- Primarily focused on configuring the debugger for Go, but can
+-- be extended to other languages as well. That's why it's called
+-- kickstart.nvim and not kitchen-sink.nvim ;)
+
+return {
+  -- NOTE: Yes, you can install new plugins here!
+  'mfussenegger/nvim-dap',
+  -- NOTE: And you can specify dependencies as well
+  dependencies = {
+    -- Creates a beautiful debugger UI
+    'rcarriga/nvim-dap-ui',
+
+    -- Required dependency for nvim-dap-ui
+    'nvim-neotest/nvim-nio',
+
+    -- Installs the debug adapters for you
+    'williamboman/mason.nvim',
+    'jay-babu/mason-nvim-dap.nvim',
+
+    -- Add your own debuggers here
+    'leoluz/nvim-dap-go',
+  },
+  config = function()
+    local dap = require 'dap'
+    local dapui = require 'dapui'
+
+    require('mason-nvim-dap').setup {
+      -- Makes a best effort to setup the various debuggers with
+      -- reasonable debug configurations
+      automatic_installation = true,
+
+      -- You can provide additional configuration to the handlers,
+      -- see mason-nvim-dap README for more information
+      handlers = {},
+
+      -- You'll need to check that you have the required things installed
+      -- online, please don't ask me how to install them :)
+      ensure_installed = {
+        -- Update this to ensure that you have the debuggers for the langs you want
+        'delve',
+      },
+    }
+
+    -- Basic debugging keymaps, feel free to change to your liking!
+    vim.keymap.set('n', '<F5>', dap.continue, { desc = 'Debug: Start/Continue' })
+    vim.keymap.set('n', '<F1>', dap.step_into, { desc = 'Debug: Step Into' })
+    vim.keymap.set('n', '<F2>', dap.step_over, { desc = 'Debug: Step Over' })
+    vim.keymap.set('n', '<F3>', dap.step_out, { desc = 'Debug: Step Out' })
+    vim.keymap.set('n', '<leader>b', dap.toggle_breakpoint, { desc = 'Debug: Toggle Breakpoint' })
+    vim.keymap.set('n', '<leader>B', function()
+      dap.set_breakpoint(vim.fn.input 'Breakpoint condition: ')
+    end, { desc = 'Debug: Set Breakpoint' })
+
+    -- Dap UI setup
+    -- For more information, see |:help nvim-dap-ui|
+    dapui.setup {
+      -- Set icons to characters that are more likely to work in every terminal.
+      --    Feel free to remove or use ones that you like more! :)
+      --    Don't feel like these are good choices.
+      icons = { expanded = '▾', collapsed = '▸', current_frame = '*' },
+      controls = {
+        icons = {
+          pause = '⏸',
+          play = '▶',
+          step_into = '⏎',
+          step_over = '⏭',
+          step_out = '⏮',
+          step_back = 'b',
+          run_last = '▶▶',
+          terminate = '⏹',
+          disconnect = '⏏',
+        },
+      },
+    }
+
+    -- Toggle to see last session result. Without this, you can't see session output in case of unhandled exception.
+    vim.keymap.set('n', '<F7>', dapui.toggle, { desc = 'Debug: See last session result.' })
+
+    dap.listeners.after.event_initialized['dapui_config'] = dapui.open
+    dap.listeners.before.event_terminated['dapui_config'] = dapui.close
+    dap.listeners.before.event_exited['dapui_config'] = dapui.close
+
+    -- Install golang specific config
+    require('dap-go').setup {
+      delve = {
+        -- On Windows delve must be run attached or it crashes.
+        -- See https://github.com/leoluz/nvim-dap-go/blob/main/README.md#configuring
+        detached = vim.fn.has 'win32' == 0,
+      },
+    }
+  end,
+}

config-files/.config/nvim/lua/kickstart/plugins/gitsigns.lua

@@ -0,0 +1,61 @@
+-- Adds git related signs to the gutter, as well as utilities for managing changes
+-- NOTE: gitsigns is already included in init.lua but contains only the base
+-- config. This will add also the recommended keymaps.
+
+return {
+  {
+    'lewis6991/gitsigns.nvim',
+    opts = {
+      on_attach = function(bufnr)
+        local gitsigns = require 'gitsigns'
+
+        local function map(mode, l, r, opts)
+          opts = opts or {}
+          opts.buffer = bufnr
+          vim.keymap.set(mode, l, r, opts)
+        end
+
+        -- Navigation
+        map('n', ']c', function()
+          if vim.wo.diff then
+            vim.cmd.normal { ']c', bang = true }
+          else
+            gitsigns.nav_hunk 'next'
+          end
+        end, { desc = 'Jump to next git [c]hange' })
+
+        map('n', '[c', function()
+          if vim.wo.diff then
+            vim.cmd.normal { '[c', bang = true }
+          else
+            gitsigns.nav_hunk 'prev'
+          end
+        end, { desc = 'Jump to previous git [c]hange' })
+
+        -- Actions
+        -- visual mode
+        map('v', '<leader>hs', function()
+          gitsigns.stage_hunk { vim.fn.line '.', vim.fn.line 'v' }
+        end, { desc = 'stage git hunk' })
+        map('v', '<leader>hr', function()
+          gitsigns.reset_hunk { vim.fn.line '.', vim.fn.line 'v' }
+        end, { desc = 'reset git hunk' })
+        -- normal mode
+        map('n', '<leader>hs', gitsigns.stage_hunk, { desc = 'git [s]tage hunk' })
+        map('n', '<leader>hr', gitsigns.reset_hunk, { desc = 'git [r]eset hunk' })
+        map('n', '<leader>hS', gitsigns.stage_buffer, { desc = 'git [S]tage buffer' })
+        map('n', '<leader>hu', gitsigns.undo_stage_hunk, { desc = 'git [u]ndo stage hunk' })
+        map('n', '<leader>hR', gitsigns.reset_buffer, { desc = 'git [R]eset buffer' })
+        map('n', '<leader>hp', gitsigns.preview_hunk, { desc = 'git [p]review hunk' })
+        map('n', '<leader>hb', gitsigns.blame_line, { desc = 'git [b]lame line' })
+        map('n', '<leader>hd', gitsigns.diffthis, { desc = 'git [d]iff against index' })
+        map('n', '<leader>hD', function()
+          gitsigns.diffthis '@'
+        end, { desc = 'git [D]iff against last commit' })
+        -- Toggles
+        map('n', '<leader>tb', gitsigns.toggle_current_line_blame, { desc = '[T]oggle git show [b]lame line' })
+        map('n', '<leader>tD', gitsigns.toggle_deleted, { desc = '[T]oggle git show [D]eleted' })
+      end,
+    },
+  },
+}

config-files/.config/nvim/lua/kickstart/plugins/indent_line.lua

@@ -0,0 +1,9 @@
+return {
+  { -- Add indentation guides even on blank lines
+    'lukas-reineke/indent-blankline.nvim',
+    -- Enable `lukas-reineke/indent-blankline.nvim`
+    -- See `:help ibl`
+    main = 'ibl',
+    opts = {},
+  },
+}

config-files/.config/nvim/lua/kickstart/plugins/lint.lua

@@ -0,0 +1,55 @@
+return {
+
+  { -- Linting
+    'mfussenegger/nvim-lint',
+    event = { 'BufReadPre', 'BufNewFile' },
+    config = function()
+      local lint = require 'lint'
+      lint.linters_by_ft = {
+        markdown = { 'markdownlint' },
+      }
+
+      -- To allow other plugins to add linters to require('lint').linters_by_ft,
+      -- instead set linters_by_ft like this:
+      -- lint.linters_by_ft = lint.linters_by_ft or {}
+      -- lint.linters_by_ft['markdown'] = { 'markdownlint' }
+      --
+      -- However, note that this will enable a set of default linters,
+      -- which will cause errors unless these tools are available:
+      -- {
+      --   clojure = { "clj-kondo" },
+      --   dockerfile = { "hadolint" },
+      --   inko = { "inko" },
+      --   janet = { "janet" },
+      --   json = { "jsonlint" },
+      --   markdown = { "vale" },
+      --   rst = { "vale" },
+      --   ruby = { "ruby" },
+      --   terraform = { "tflint" },
+      --   text = { "vale" }
+      -- }
+      --
+      -- You can disable the default linters by setting their filetypes to nil:
+      -- lint.linters_by_ft['clojure'] = nil
+      -- lint.linters_by_ft['dockerfile'] = nil
+      -- lint.linters_by_ft['inko'] = nil
+      -- lint.linters_by_ft['janet'] = nil
+      -- lint.linters_by_ft['json'] = nil
+      -- lint.linters_by_ft['markdown'] = nil
+      -- lint.linters_by_ft['rst'] = nil
+      -- lint.linters_by_ft['ruby'] = nil
+      -- lint.linters_by_ft['terraform'] = nil
+      -- lint.linters_by_ft['text'] = nil
+
+      -- Create autocommand which carries out the actual linting
+      -- on the specified events.
+      local lint_augroup = vim.api.nvim_create_augroup('lint', { clear = true })
+      vim.api.nvim_create_autocmd({ 'BufEnter', 'BufWritePost', 'InsertLeave' }, {
+        group = lint_augroup,
+        callback = function()
+          require('lint').try_lint()
+        end,
+      })
+    end,
+  },
+}

config-files/.config/nvim/lua/kickstart/plugins/neo-tree.lua

@@ -0,0 +1,25 @@
+-- Neo-tree is a Neovim plugin to browse the file system
+-- https://github.com/nvim-neo-tree/neo-tree.nvim
+
+return {
+  'nvim-neo-tree/neo-tree.nvim',
+  version = '*',
+  dependencies = {
+    'nvim-lua/plenary.nvim',
+    'nvim-tree/nvim-web-devicons', -- not strictly required, but recommended
+    'MunifTanjim/nui.nvim',
+  },
+  cmd = 'Neotree',
+  keys = {
+    { '\\', ':Neotree reveal<CR>', { desc = 'NeoTree reveal' } },
+  },
+  opts = {
+    filesystem = {
+      window = {
+        mappings = {
+          ['\\'] = 'close_window',
+        },
+      },
+    },
+  },
+}

config-files/.config/picom/picom.conf

@@ -0,0 +1,61 @@
+backend = "glx";
+glx-no-stencil = true;
+glx-copy-from-front = false;
+
+# Opacity
+active-opacity = 1;
+inactive-opacity = 1;
+frame-opacity = 1;
+#inactive-opacity-override = false;
+#blur-background = false;
+#blur-background-exclude = [
+#  "window_type = 'dock'
+#]
+
+#blur-method = "dual_kawase";
+#blur-strength = 8;
+
+# Fading
+fading = false;
+#fade-delta = 2;
+#no-fading-openclose = false;
+
+#fade-exclude = [ ];
+
+# Other
+#mark-wmwin-focused = true;
+#mark-ovredir-focused = true;
+#detect-rounded-corners = true;
+#detect-clien-opacity = true;
+vsync = true;
+dbe = false;
+#unredir-if-possible = false;
+#focus-exclude = [ ];
+#detect-transient = true;
+#detect-client-leader = true;
+
+# Window type settings
+#wintypes:
+#{
+#  dock = {
+#    shadow = false;
+#  };
+#};
+
+# Window transparency
+opacity-rule = [
+  #"90:class_g = 'st'",
+];
+
+shadow = false;
+#shadow-radius = 12;
+#shadow-offset-x = -5;
+#shadow-offset-y = -5;
+#shadow-opacity = 0.5;
+#shadow-green = 1.0;
+
+#shadow-exclude = [ ];
+
+#corner-radius = 0;
+
+xrender-sync-fence = true;

config-files/.config/zed/settings.json

@@ -0,0 +1,139 @@
+// Trude's Zed Settings
+//
+// For information on how to configure Zed, see the Zed
+// documentation: https://zed.dev/docs/configuring-zed
+//
+// To see all of Zed's default settings without changing your
+// custom settings, run the `open default settings` command
+// from the command palette or from `Zed` application menu.
+{
+  "base_keymap": "VSCode",
+  "vim_mode": false,
+  "telemetry": {
+    "diagnostics": false,
+    "metrics": false
+  },
+  "ui_font_size": 14,
+  "buffer_font_size": 14,
+  "buffer_font_family": "JetBrainsMono NF",
+  "buffer_font_features": {
+    // Enable ligatures:
+    "calt": true
+  },
+  "buffer_font_weight": 300,
+  "buffer_line_height": "comfortable",
+  "ui_font_family": "JetBrainsMono NF",
+  // The OpenType features to enable for text in the UI
+  "ui_font_features": {
+    "calt": true
+  },
+  "hover_popover_enabled": true,
+  "confirm_quit": false,
+  "restore_on_startup": "last_workspace",
+  "show_completions_on_input": true,
+  "show_completion_documentation": true,
+  "show_wrap_guides": true,
+  "redact_private_values": true,
+  "private_files": [
+    "**/.env*",
+    "**/*.pem",
+    "**/*.key",
+    "**/*.cert",
+    "**/*.crt",
+    "**/secrets.yml"
+  ],
+  "use_on_type_format": true,
+  "use_autoclose": true,
+  "use_auto_surround": true,
+  "always_treat_brackets_as_autoclosed": false,
+  "show_inline_completions": true,
+  "calls": {
+    "mute_on_join": true,
+    "share_on_join": false
+  },
+  "toolbar": {
+    "breadcrumbs": true,
+    "quick_actions": true,
+    "selections_menu": true
+  },
+  "message_editor": {
+    "auto_replace_emoji_shortcode": false
+  },
+  "enable_language_server": true,
+  "autosave": "off",
+  "tab_bar": {
+    "show": true,
+    "show_nav_history_buttons": true
+  },
+  "tabs": {
+    "git_status": false,
+    "close_position": "right"
+  },
+  "format_on_save": "on",
+  "formatter": "auto",
+  "auto_update": true,
+  "file_scan_exclusions": [
+    "**/.git",
+    "**/.svn",
+    "**/.hg",
+    "**/CVS",
+    "**/.DS_Store",
+    "**/Thumbs.db",
+    "**/.classpath",
+    "**/.settings"
+  ],
+  "auto_install_extensions": {
+    "html": true,
+    "make": true,
+    "emmet": true
+  },
+  "languages": {
+    "C": {
+      "format_on_save": "on"
+    },
+    "C++": {
+      "format_on_save": "on"
+    }
+  },
+  "vim": {
+    "use_system_clipboard": "always",
+    "use_multiline_find": false,
+    "use_smartcase_find": false
+  },
+  "server_url": "https://zed.dev",
+  "terminal": {
+    "shell": "system",
+    "dock": "bottom",
+    "default_width": 640,
+    "default_height": 320,
+    "working_directory": "current_project_directory",
+    "blinking": "terminal_controlled",
+    "alternate_scroll": "on",
+    "option_as_meta": false,
+    "copy_on_select": true,
+    "button": true,
+    "env": {
+      // "KEY": "value1:value2"
+    },
+    "line_height": "standard",
+    "detect_venv": {
+      "on": {
+        "directories": [".env", "env", ".venv", "venv"],
+        "activate_script": "default"
+      }
+    },
+    "toolbar": {
+      "title": true
+    }
+  },
+  "code_actions_on_format": {},
+  "tasks": {
+    "variables": {}
+  },
+  "show_whitespaces": "selection",
+  "theme": {
+    "mode": "system",
+    "light": "One Light",
+    "dark": "Ayu Dark"
+  }
+}

config-files/.dialogrc

@@ -0,0 +1,147 @@
+#
+# Run-time configuration file for dialog
+#
+# Automatically generated by "dialog --create-rc <file>"
+#
+#
+# Types of values:
+#
+# Number     -  <number>
+# String     -  "string"
+# Boolean    -  <ON|OFF>
+# Attribute  -  (foreground,background,highlight?,underline?,reverse?)
+
+# Set aspect-ration.
+aspect = 0
+
+# Set separator (for multiple widgets output).
+separate_widget = ""
+
+# Set tab-length (for textbox tab-conversion).
+tab_len = 0
+
+# Make tab-traversal for checklist, etc., include the list.
+visit_items = OFF
+
+# Show scrollbar in dialog boxes?
+# use_scrollbar = OFF
+
+# Shadow dialog boxes? This also turns on color.
+use_shadow = ON
+
+# Turn color support ON or OFF
+use_colors = ON
+
+# Screen color
+screen_color = (WHITE,BLACK,OFF)
+
+# Shadow color
+shadow_color = (BLACK,BLACK,ON)
+
+# Dialog box color
+dialog_color = (BLACK,WHITE,OFF)
+
+# Dialog box title color
+title_color = (BLACK,WHITE,OFF)
+
+# Dialog box border color
+border_color = (WHITE,WHITE,ON)
+
+# Active button color
+button_active_color = (WHITE,BLACK,ON)
+
+# Inactive button color
+button_inactive_color = dialog_color
+
+# Active button key color
+button_key_active_color = button_active_color
+
+# Inactive button key color
+button_key_inactive_color = (BLACK,WHITE,OFF)
+
+# Active button label color
+button_label_active_color = (WHITE,BLACK,ON)
+
+# Inactive button label color
+button_label_inactive_color = (BLACK,WHITE,ON)
+
+# Input box color
+inputbox_color = dialog_color
+
+# Input box border color
+inputbox_border_color = dialog_color
+
+# Search box color
+searchbox_color = dialog_color
+
+# Search box title color
+searchbox_title_color = title_color
+
+# Search box border color
+searchbox_border_color = border_color
+
+# File position indicator color
+position_indicator_color = title_color
+
+# Menu box color
+menubox_color = dialog_color
+
+# Menu box border color
+menubox_border_color = border_color
+
+# Item color
+item_color = dialog_color
+
+# Selected item color
+item_selected_color = button_active_color
+
+# Tag color
+tag_color = title_color
+
+# Selected tag color
+tag_selected_color = button_label_active_color
+
+# Tag key color
+tag_key_color = button_key_inactive_color
+
+# Selected tag key color
+tag_key_selected_color = (WHITE,BLACK,ON)
+
+# Check box color
+check_color = dialog_color
+
+# Selected check box color
+check_selected_color = button_active_color
+
+# Up arrow color
+uarrow_color = (GREEN,WHITE,ON)
+
+# Down arrow color
+darrow_color = uarrow_color
+
+# Item help-text color
+itemhelp_color = screen_color
+
+# Active form text color
+form_active_text_color = button_active_color
+
+# Form text color
+form_text_color = (WHITE,BLACK,ON)
+
+# Readonly form item color
+form_item_readonly_color = (BLACK,WHITE,ON)
+
+# Dialog box gauge color
+gauge_color = title_color
+
+# Dialog box border2 color
+border2_color = dialog_color
+
+# Input box border2 color
+inputbox_border2_color = dialog_color
+
+# Search box border2 color
+searchbox_border2_color = dialog_color
+
+# Menu box border2 color
+menubox_border2_color = dialog_color

config-files/.homepage/index.html

@@ -0,0 +1,18 @@
+<!DOCTYPE html>
+<html lang="en">
+<head>
+  <meta charset="UTF-8">
+  <meta name="viewport" content="width=device-width, initial-scale=1.0">
+  <link rel="stylesheet" href="style.css">
+  <title>Homepage</title>
+</head>
+<body>
+  <div class="clock" id="clock">
+    <span id="clock-text"></span>
+  </div>
+  <div class="date" id="date">
+    <span id="date-text"></span>
+  </div>
+  <script src="script.js"></script>
+</body>
+</html>

config-files/.homepage/script.js

@@ -0,0 +1,44 @@
+// Load the config.json file (using JavaScript vanilla)
+
+let clock_text = document.getElementById('clock-text');
+let date_text = document.getElementById('date-text');
+
+displayTime();
+setInterval(displayTime, 1000);
+displayDate();
+setInterval(displayDate, 60000);
+
+function displayTime() {
+  let date = new Date();
+  let hours = date.getHours();
+  let minutes = date.getMinutes();
+  let ampm = hours >= 12 ? 'PM' : 'AM';
+  hours = hours % 12;
+  hours = hours ? hours : 12;
+  minutes = minutes < 10 ? '0'+minutes : minutes;
+  let time = hours + ":" + minutes + " " + ampm;
+  clock_text.innerHTML = time;
+}
+
+function displayDate() {
+  let date = new Date();
+  let days = ['Sunday', 'Monday', 'Tuesday', 'Wednesday', 'Thursday', 'Friday', 'Saturday'];
+  let day = days[date.getDay()];
+  let dayNumber = date.getDate();
+  let month = date.toLocaleString('default', { month: 'long' });
+  let year = date.getFullYear();
+
+  if (dayNumber == 1 || dayNumber == 21 || dayNumber == 31) {
+    dayNumber += "st";
+  } else if (dayNumber == 2 || dayNumber == 22) {
+    dayNumber += "nd";
+  } else if (dayNumber == 3 || dayNumber == 23) {
+    dayNumber += "rd";
+  } else {
+    dayNumber += "th";
+  }
+
+  let dateText = day + ", " + dayNumber + " " + month + " " + year;
+  date_text.innerHTML = dateText;
+}
+

config-files/.homepage/style.css

@@ -0,0 +1,19 @@
+html, body {
+    font-family: "JetBrainsMono NF", system-ui, -apple-system, BlinkMacSystemFont, 'Segoe UI', Roboto, Oxygen, Ubuntu, Cantarell, 'Open Sans', 'Helvetica Neue', sans-serif;
+    color: #ebdbb2;
+    text-align: center;
+    background: #282828;
+    height: 100%;
+    display: flex;
+    flex-direction: column;
+    justify-content: center;
+}
+
+.clock {
+    font-size: 8rem;
+}
+
+.date {
+    font-size: 2rem;
+}
+

config-files/.local/bin/dm-bluetooth

@@ -0,0 +1,412 @@
+#!/usr/bin/env bash
+#      _                                  _     _            _              _    _
+#   __| |_ __ ___   ___ _ __  _   _      | |__ | |_   _  ___| |_ ___   ___ | |_ | |__
+#  / _` | '_ ` _ \ / _ \ '_ \| | | |_____| '_ \| | | | |/ _ \ __/ _ \ / _ \| __|| '_ \
+# | (_| | | | | | |  __/ | | | |_| |_____| |_) | | |_| |  __/ || (_) | (_) | |_ | | | |
+#  \__,_|_| |_| |_|\___|_| |_|\__,_|     |_.__/|_|\__,_|\___|\__\___/ \___/ \__||_| |_|
+#
+# Author: Nick Clyde (clydedroid)
+# dmenu support by: Layerex
+# Original script: https://github.com/nickclyde/rofi-bluetooth
+#
+# A script that generates a dmenu menu that uses bluetoothctl to
+# connect to bluetooth devices and display status info.
+#
+# Inspired by networkmanager-dmenu (https://github.com/firecat53/networkmanager-dmenu)
+# Thanks to x70b1 (https://github.com/polybar/polybar-scripts/tree/master/polybar-scripts/system-bluetooth-bluetoothctl)
+#
+# Depends on:
+#   Arch repositories: dmenu, bluez-utils (contains bluetoothctl)
+
+# Constants
+divider="---------"
+goback="Back"
+exit="Exit"
+connected_icon=""
+
+# Checks if bluetooth controller is powered on
+power_on() {
+    if bluetoothctl show | grep -F -q "Powered: yes"; then
+        return 0
+    else
+        return 1
+    fi
+}
+
+# Toggles power state
+toggle_power() {
+    if power_on; then
+        bluetoothctl power off
+        show_menu
+    else
+        if rfkill list bluetooth | grep -F -q 'blocked: yes'; then
+            rfkill unblock bluetooth && sleep 3
+        fi
+        bluetoothctl power on
+        show_menu
+    fi
+}
+
+# Checks if controller is scanning for new devices
+scan_on() {
+    if bluetoothctl show | grep -F -q "Discovering: yes"; then
+        echo "Scan: on"
+        return 0
+    else
+        echo "Scan: off"
+        return 1
+    fi
+}
+
+# Toggles scanning state
+toggle_scan() {
+    if scan_on; then
+        kill "$(pgrep -f "bluetoothctl scan on")"
+        bluetoothctl scan off
+        show_menu
+    else
+        bluetoothctl scan on &
+        echo "Scanning..."
+        sleep 5
+        show_menu
+    fi
+}
+
+# Checks if controller is able to pair to devices
+pairable_on() {
+    if bluetoothctl show | grep -F -q "Pairable: yes"; then
+        echo "Pairable: on"
+        return 0
+    else
+        echo "Pairable: off"
+        return 1
+    fi
+}
+
+# Toggles pairable state
+toggle_pairable() {
+    if pairable_on; then
+        bluetoothctl pairable off
+        show_menu
+    else
+        bluetoothctl pairable on
+        show_menu
+    fi
+}
+
+# Checks if controller is discoverable by other devices
+discoverable_on() {
+    if bluetoothctl show | grep -F -q "Discoverable: yes"; then
+        echo "Discoverable: on"
+        return 0
+    else
+        echo "Discoverable: off"
+        return 1
+    fi
+}
+
+# Toggles discoverable state
+toggle_discoverable() {
+    if discoverable_on; then
+        bluetoothctl discoverable off
+        show_menu
+    else
+        bluetoothctl discoverable on
+        show_menu
+    fi
+}
+
+# Checks if a device is connected
+device_connected() {
+    if bluetoothctl info "$1" | grep -F -q "Connected: yes"; then
+        return 0
+    else
+        return 1
+    fi
+}
+
+# Toggles device connection
+toggle_connection() {
+    if device_connected "$1"; then
+        bluetoothctl disconnect "$1"
+        # device_menu "$device"
+    else
+        bluetoothctl connect "$1"
+        # device_menu "$device"
+    fi
+}
+
+# Checks if a device is paired
+device_paired() {
+    if bluetoothctl info "$1" | grep -F -q "Paired: yes"; then
+        echo "Paired: yes"
+        return 0
+    else
+        echo "Paired: no"
+        return 1
+    fi
+}
+
+# Toggles device paired state
+toggle_paired() {
+    if device_paired "$1"; then
+        bluetoothctl remove "$1"
+        device_menu "$device"
+    else
+        bluetoothctl pair "$1"
+        device_menu "$device"
+    fi
+}
+
+# Checks if a device is trusted
+device_trusted() {
+    if bluetoothctl info "$1" | grep -F -q "Trusted: yes"; then
+        echo "Trusted: yes"
+        return 0
+    else
+        echo "Trusted: no"
+        return 1
+    fi
+}
+
+# Toggles device connection
+toggle_trust() {
+    if device_trusted "$1"; then
+        bluetoothctl untrust "$1"
+        device_menu "$device"
+    else
+        bluetoothctl trust "$1"
+        device_menu "$device"
+    fi
+}
+
+# Prints a short string with the current bluetooth status
+# Useful for status bars like polybar, etc.
+print_status() {
+    if power_on; then
+        printf ''
+
+        mapfile -t paired_devices < <(bluetoothctl paired-devices | grep -F Device | cut -d ' ' -f 2)
+        counter=0
+
+        for device in "${paired_devices[@]}"; do
+            if device_connected "$device"; then
+                device_alias="$(bluetoothctl info "$device" | grep -F "Alias" | cut -d ' ' -f 2-)"
+
+                if [ $counter -gt 0 ]; then
+                    printf ", %s" "$device_alias"
+                else
+                    printf " %s" "$device_alias"
+                fi
+
+                ((counter++))
+            fi
+        done
+        printf "\n"
+    else
+        echo ""
+    fi
+}
+
+# A submenu for a specific device that allows connecting, pairing, and trusting
+device_menu() {
+    device="$1"
+
+    # Get device name and mac address
+    device_name="$(echo "$device" | cut -d ' ' -f 3-)"
+    mac="$(echo "$device" | cut -d ' ' -f 2)"
+
+    # Build options
+    if device_connected "$mac"; then
+        connected="Connected: yes"
+    else
+        connected="Connected: no"
+    fi
+    paired="$(device_paired "$mac")"
+    trusted="$(device_trusted "$mac")"
+    options="$connected\n$paired\n$trusted\n$divider\n$goback\n$exit"
+
+    # Open dmenu menu, read chosen option
+    chosen="$(echo -e "$options" | run_dmenu "$device_name")"
+
+    # Match chosen option to command
+    case $chosen in
+        "" | "$divider")
+            echo "No option chosen."
+            ;;
+        "$connected")
+            toggle_connection "$mac"
+            ;;
+        "$paired")
+            toggle_paired "$mac"
+            ;;
+        "$trusted")
+            toggle_trust "$mac"
+            ;;
+        "$goback")
+            show_menu
+            ;;
+    esac
+}
+
+# Opens a dmenu menu with current bluetooth status and options to connect
+show_menu() {
+    # Get menu options
+    if power_on; then
+        power="Power: on"
+
+        # Human-readable names of devices, one per line
+        # If scan is off, will only list paired devices
+        if [[ -n "$connected_icon" ]]; then
+            devices="$(bluetoothctl devices | grep -F Device | while read -r device; do
+                device_name="$(echo "$device" | cut -d ' ' -f 3-)"
+                mac="$(echo "$device" | cut -d ' ' -f 2)"
+                icon=""
+
+                if device_connected "$mac" && [[ -n $connected_icon ]]; then
+                    icon=" $connected_icon"
+                fi
+
+                echo "$device_name${icon}"
+            done)"
+        else
+            devices="$(bluetoothctl devices | grep -F Device | cut -d ' ' -f 3-)"
+        fi
+
+        # Get controller flags
+        scan="$(scan_on)"
+        pairable="$(pairable_on)"
+        discoverable="$(discoverable_on)"
+
+        # Options passed to dmenu
+        [[ -n $devices ]] && devices_part="$devices\n$divider\n"
+        options="$devices_part$power\n$scan\n$pairable\n$discoverable\n$exit"
+    else
+        power="Power: off"
+        options="$power\n$exit"
+    fi
+
+    # Open dmenu menu, read chosen option
+    chosen="$(echo -e "$options" | run_dmenu "Bluetooth")"
+
+    # Match chosen option to command
+    case $chosen in
+        "" | "$divider")
+            echo "No option chosen."
+            ;;
+        "$power")
+            toggle_power
+            ;;
+        "$scan")
+            toggle_scan
+            ;;
+        "$discoverable")
+            toggle_discoverable
+            ;;
+        "$pairable")
+            toggle_pairable
+            ;;
+        *)
+            if [[ -n "$connected_icon" ]]; then
+                chosen="${chosen%% ${connected_icon}}"
+            fi
+            device="$(bluetoothctl devices | grep -F "$chosen")"
+            # Open a submenu if a device is selected
+            if [[ -n "$device" ]]; then device_menu "$device"; fi
+            ;;
+    esac
+}
+
+# dmenu command to pipe into. Extra arguments to dmenu-bluetooth are passed through to dmenu. This
+# allows the user to set fonts, sizes, colours, etc.
+DMENU_BLUETOOTH_LAUNCHER="${DMENU_BLUETOOTH_LAUNCHER:-dmenu}"
+run_dmenu() {
+    case "$DMENU_BLUETOOTH_LAUNCHER" in
+        rofi)
+            DMENU_BLUETOOTH_LAUNCHER="rofi -dmenu"
+            ;;
+        fuzzel)
+            DMENU_BLUETOOTH_LAUNCHER="fuzzel --dmenu"
+            ;;
+    esac
+    $DMENU_BLUETOOTH_LAUNCHER -i -p "$DMENU_BLUETOOTH_PROMPT" "-l" "20" "${dmenu_args[@]}"
+}
+
+print_help() {
+    echo "usage: $0 [--help] [--status] [--connected-icon [ICON]] [PROMPT] DMENU_ARGS..."
+    echo ""
+    echo "A script that generates a dmenu menu that uses bluetoothctl to connect to bluetooth devices and display status info."
+    echo ""
+    echo "positional arguments:"
+    echo "  PROMPT                    dmenu prompt"
+    echo "  DMENU_ARGS...             arguments passed to dmenu"
+    echo ""
+    echo "options:"
+    echo "--help                      show this help message and exit"
+    echo "--status                    print a short string about current bluetooth status and exit"
+    echo "--connected-icon [ICON]     add icon on device list next to connected devices"
+    echo ""
+    echo "environment variables:"
+    echo "  DMENU_BLUETOOTH_PROMPT    dmenu prompt"
+    echo "  DMENU_BLUETOOTH_LAUNCHER  command to use instead of 'dmenu'"
+    echo ""
+    echo "Positional arguments have to be placed after all other arguments."
+    echo "A PROMPT positional argument will be interpreted as part of DMENU_ARGS if it starts with '-'. It won't be parsed if the DMENU_BLUETOOTH_PROMPT environment variable is set."
+    echo "Use the DMENU_BLUETOOTH_LAUNCHER environment variable to use launchers other than dmenu. Rofi, fuzzel, and any dmenu-compatible launchers are supported."
+}
+
+command_present() {
+    command -v "$1" >/dev/null 2>&1
+}
+
+error() {
+    echo "$1. $2." >&2
+    command_present notify-send && notify-send "$1" "$2."
+}
+
+# Check if bluetooth daemon is running. Start it if possible.
+if command_present systemctl; then
+    systemctl is-active --quiet bluetooth
+    case $? in
+        3)
+            error "Bluetooth daemon is not running" "Start it to use this script"
+            systemctl start bluetooth || exit 3
+            ;;
+        4)
+            error "Bluetooth daemon is not present" "On Arch Linux install bluez and bluez-utils packages"
+            exit 4
+            ;;
+    esac
+fi
+
+dmenu_args=("$@")
+case "$1" in
+    --help)
+        print_help
+        exit
+        ;;
+    --status)
+        print_status
+        exit
+        ;;
+    --connected-icon)
+        if [[ "$2" == "--" ]]; then
+            connected_icon=""
+        else
+            connected_icon="$2"
+        fi
+        dmenu_args=("${dmenu_args[@]:2}")
+        ;;
+esac
+case "${dmenu_args[0]}" in
+    -*)
+        ;;
+    *)
+        if [[ -z "$DMENU_BLUETOOTH_PROMPT" ]]; then
+            DMENU_BLUETOOTH_PROMPT="${dmenu_args[0]}"
+            dmenu_args=("${dmenu_args[@]:1}")
+        fi
+        ;;
+esac
+
+show_menu

config-files/.local/bin/dm-kill

@@ -0,0 +1,23 @@
+#!/usr/bin/env bash
+
+# dmenu theming
+lines="-l 20"
+
+selected="$(ps -a -u $USER | \
+            dmenu -i -p "Type to search and select process to kill" \
+            $lines | \
+            awk '{print $1" "$4}')"; 
+
+if [[ ! -z $selected ]]; then
+
+    answer="$(echo -e "Yes\nNo" | \
+            dmenu -i -p "$selected will be killed, are you sure?" \
+            $lines )"
+
+    if [[ $answer == "Yes" ]]; then
+        selpid="$(awk '{print $1}' <<< $selected)"; 
+        kill -9 $selpid
+    fi
+fi
+
+exit 0

config-files/.local/bin/dm-mansearch

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+
+prompt="-p Manual:"
+
+# terminal to open manual
+terminal="st"
+
+# list all manuals
+manual="$(man -k . | dmenu $prompt | awk '{print $1}')"
+
+# open selected manual with terminal
+if [[ ! -z "$manual" ]]; then
+    eval "$($terminal -e man $manual)"
+fi
+
+exit 0
+
+

config-files/.local/bin/dm-mpd

@@ -0,0 +1,76 @@
+#!/bin/bash
+
+all_name='[ALL]'
+mode=library
+
+d_artist() {
+    mpc list artist | sort -f | dmenu -p artist "${dmenu_args[@]}"
+}
+
+d_album() {
+    local artist="$1"
+    local albums
+
+    mapfile -t albums < <(mpc list album artist "$artist")
+    if (( ${#albums[@]} > 1 )) ; then
+        {
+            printf '%s\n' "$all_name"
+            printf '%s\n' "${albums[@]}" | sort -f
+        } | dmenu -p album "${dmenu_args[@]}"
+    else
+        # We only have one album, so just use that.
+        printf '%s\n' "${albums[0]}"
+    fi
+}
+
+d_playlist() {
+    local format="%position% %title%"
+    local extra_format="(%artist% - %album%)"
+    local track
+    local num_extras
+
+    # If all tracks are from the same artist and album, no need to display that
+    num_extras=$(mpc playlist -f "$extra_format" | sort | uniq | wc -l)
+    (( num_extras == 1 )) || format+=" $extra_format"
+
+    track=$(mpc playlist -f "$format" | dmenu -p track "${dmenu_args[@]}")
+    printf '%s' "${track%% *}"
+}
+
+i=2
+
+for arg do
+    if [[ $arg == :: ]]; then
+        dmenu_args=( "${@:$i}" )
+        break
+    fi
+
+    case "$arg" in
+        -l) mode=library ;;
+        -p) mode=playlist ;;
+    esac
+
+    let i++
+done
+
+case "$mode" in
+    library)
+        artist=$(d_artist)
+        [[ $artist ]] || exit 1
+
+        album=$(d_album "$artist")
+        [[ $album ]] || exit 2
+
+        mpc clear
+        if [[ $album == "$all_name" ]]; then
+            mpc find artist "$artist" | sort | mpc add
+        else
+            mpc find artist "$artist" album "$album" | sort | mpc add
+        fi
+
+        mpc play >/dev/null
+    ;;
+    playlist)
+        mpc play "$(d_playlist)" >/dev/null
+    ;;
+esac

config-files/.local/bin/dm-pass

@@ -0,0 +1,60 @@
+#!/usr/bin/env bash
+
+shopt -s nullglob globstar
+
+typeit=0
+if [[ $1 == "--type" ]]; then
+	typeit=1
+	shift
+fi
+
+
+STARTDIR=${PASSWORD_STORE_DIR-~/.password-store}
+BASEDIR=$STARTDIR
+DONE=0
+LEVEL=0
+PREVSELECTION=""
+SELECTION=""
+
+while [ "$DONE" -eq 0 ] ; do 
+  password_files=( "$STARTDIR"/* )
+  password_files=( "${password_files[@]#"$STARTDIR"/}" )
+  password_files=( "${password_files[@]%.gpg}" )
+  
+  if [ "$LEVEL" -ne 0 ] ; then
+    password_files=(".." "${password_files[@]}") 
+  fi
+  entry=$(printf '%s\n' "${password_files[@]}" | dmenu "$@" -l 15)
+  
+  echo "entry: $entry"
+  if [ -z "$entry" ] ; then
+    DONE=1
+    exit
+  fi
+  
+  if [ "$entry" != ".." ] ; then
+    PREVSELECTION=$SELECTION
+    SELECTION="$SELECTION/$entry"
+  
+    # check if another dir
+    if [ -d "$STARTDIR/$entry" ] ; then
+      STARTDIR="$STARTDIR/$entry"
+      LEVEL=$((LEVEL+1))
+    else
+      # not a directory so it must be a real password entry
+  
+      if [[ $typeit -eq 0 ]]; then
+        pass show -c "$SELECTION" 2>/dev/null
+      else
+        xdotool - <<<"type --clearmodifiers -- $(pass show "$SELECTION" | head -n 1)"
+      fi
+      DONE=1
+    fi
+  
+  else
+    LEVEL=$((LEVEL-1))
+    SELECTION=$PREVSELECTION
+    STARTDIR="$BASEDIR/$SELECTION"
+  fi
+done
+

config-files/.local/bin/dm-todo

@@ -0,0 +1,28 @@
+#!/bin/sh
+#
+# Write/remove a task to do later.
+#
+# Select an existing entry to remove it from the file, or type a new entry to
+# add it.
+#
+
+file="$HOME/.todo"
+touch "$file"
+height=$(wc -l "$file" | awk '{print $1}')
+prompt="Add/delete a task: "
+
+cmd=$(dmenu -l "$height" -p "$prompt" "$@" < "$file")
+while [ -n "$cmd" ]; do
+ 	if grep -q "^$cmd\$" "$file"; then
+		grep -v "^$cmd\$" "$file" > "$file.$$"
+		mv "$file.$$" "$file"
+        height=$(( height - 1 ))
+ 	else
+		echo "$cmd" >> "$file"
+		height=$(( height + 1 ))
+ 	fi
+
+	cmd=$(dmenu -l "$height" -p "$prompt" "$@" < "$file")
+done
+
+exit 0

config-files/.local/bin/dm-usb-mount

@@ -0,0 +1,4 @@
+#!/bin/sh
+
+udisksctl mount -b $(lsblk -lp | awk '/part/ {print $1, "(" $4 ")"}' | dmenu -p mount)
+

config-files/.local/bin/dm-usb-poweroff

@@ -0,0 +1,3 @@
+#!/bin/sh
+
+udisksctl power-off -b $(lsblk -lp | awk '/part/ {print $1, "(" $4 ")"}' | dmenu -p poweroff)

config-files/.local/bin/dm-usb-unmount

@@ -0,0 +1,3 @@
+#!/bin/sh
+
+udisksctl unmount -b $(lsblk -lp | awk '/part/ {print $1, "(" $4 ")"}' | dmenu -p unmount)

config-files/.local/bin/dm-web

@@ -0,0 +1,28 @@
+#!/bin/bash
+
+engine="https://www.google.com/search?q="
+
+declare -A bookmarks=(    
+    ["YouTube"]="https://www.youtube.com/"
+    ["GitHub"]="https://github.com/TrudeEH/dotfiles"
+    ["TrudeWeb"]="https://trudeeh.github.io/web/"
+    ["Gemini"]="https://gemini.google.com/app"
+    ["Element"]="https://app.element.io/#/home"
+    ["Gmail"]="https://mail.google.com/mail/u/0/#inbox"
+    ["Google Messages"]="https://messages.google.com/web/conversations"
+    ["WOL"]="https://wol.jw.org/pt-PT/"
+    ["Discord"]="https://discord.com/app"
+)
+
+choice=$(printf "%s\n" "${!bookmarks[@]}" | dmenu -i -p "Search:")
+
+if [[ -n "$choice" ]]; then
+    # Find the matching URL
+    url=${bookmarks[$choice]}
+
+    if [[ -n "$url" ]]; then
+        xdg-open $url
+    else
+        xdg-open $engine$choice
+    fi
+fi

config-files/.local/bin/multimc

@@ -0,0 +1,4 @@
+#! /bin/bash
+
+/opt/multimc/run.sh
+

config-files/.local/bin/sb-battery

@@ -0,0 +1,25 @@
+#!/bin/sh
+
+# Prints all batteries, their percentage remaining and an emoji corresponding
+# to charge status (🔌 for plugged up, 🔋 for discharging on battery, etc.).
+
+# Loop through all attached batteries and format the info
+# for battery in /sys/class/power_supply/BAT?*; do # For standard devices, use this line instead.
+for battery in /sys/class/power_supply/?*; do
+	# If non-first battery, print a space separator.
+	[ -n "${capacity+x}" ] && [ -f "$battery/status" ] && printf " "
+	# Sets up the status and capacity
+	case "$(cat "$battery/status" 2>&1)" in
+		"Full") status="󰁹 " ;;
+		"Discharging") status="󰂌 " ;;
+		"Charging") status="󰂄 " ;;
+		"Not charging") status="󰂃 " ;;
+		"Unknown") status="󰂑 " ;;
+		*) exit 1 ;;
+	esac
+	capacity="$(cat "$battery/capacity" 2>&1)"
+	# Will make a warn variable if discharging and low
+	[ "$status" = "󰂌 " ] && [ "$capacity" -le 25 ] && warn=" "
+	# Prints the info
+	printf "%s%s%d%%" "$status" "$warn" "$capacity"; unset warn
+done && printf "\\n"

config-files/.local/bin/sb-cpu

@@ -0,0 +1,26 @@
+#!/bin/sh
+
+# Module showing overall CPU usage as a percentage.
+# Cache in tmpfs to improve speed and reduce SSD load
+cache=/tmp/cpubarscache
+
+# Extract CPU stats (total time and idle time)
+cpu_stats=$(awk '/^cpu / {print $2 + $3 + $4 + $5, $5}' /proc/stat)
+
+# Check if cache exists, if not, initialize it
+[ ! -f $cache ] && echo "$cpu_stats" > "$cache"
+
+# Read previous CPU stats from cache
+prev_stats=$(cat "$cache")
+
+# Calculate CPU usage percentage and exit immediately
+echo "$cpu_stats $prev_stats" | awk '{
+    total_diff = $1 - $3
+    idle_diff = $2 - $4
+    usage = 100 * (1 - idle_diff / total_diff)
+    printf " %.1f%%\n", usage
+    exit  # Terminate script after printing the first line
+}'
+
+# Update cache with current stats
+echo "$cpu_stats" > "$cache"

config-files/.local/bin/sb-memory

@@ -0,0 +1,3 @@
+#!/bin/sh
+
+free --mebi | sed -n '2{p;q}' | awk '{printf (" %2.2fGB/%2.2fGB\n", ( $3 / 1024), ($2 / 1024))}'

config-files/.local/bin/sb-network

@@ -0,0 +1,17 @@
+#!/bin/sh
+
+# Show wifi 📶 and percent strength or 📡 if none.
+# Show 🌐 if connected to ethernet or ❎ if none.
+# Show 🔒 if a vpn connection is active
+
+# Wifi
+if [ "$(cat /sys/class/net/w*/operstate 2>/dev/null)" = 'up' ] ; then
+	wifiicon="$(awk '/^[[:space:]]*w/ { gsub(/[[:space:]]+/, " "); print " ", int($3 * 100 / 70) "% " }' /proc/net/wireless)"
+elif [ "$(cat /sys/class/net/w*/operstate 2>/dev/null)" = 'down' ] ; then
+	wifiicon=" "
+fi
+
+# Ethernet
+[ "$(cat /sys/class/net/e*/operstate 2>/dev/null)" = 'up' ] && ethericon="󰛳 " || ethericon="󰅛 "
+
+printf "%s%s\n" "$wifiicon" "$ethericon"

config-files/.local/bin/sb-volume

@@ -0,0 +1,28 @@
+#!/bin/sh
+
+# Prints the current volume or   if muted.
+
+vol="$(wpctl get-volume @DEFAULT_AUDIO_SINK@)"
+
+# If muted, print   and exit.
+[ "$vol" != "${vol%\[MUTED\]}" ] && echo "  " && exit
+
+vol="${vol#Volume: }"
+
+split() {
+	# For ommiting the . without calling and external program.
+	IFS=$2
+	set -- $1
+	printf '%s' "$@"
+}
+
+vol="$(printf "%.0f" "$(split "$vol" ".")")"
+
+case 1 in
+	$((vol >= 70)) ) icon="  " ;;
+	$((vol >= 30)) ) icon=" " ;;
+	$((vol >= 1)) ) icon=" " ;;
+	* ) echo " " && exit ;;
+esac
+
+echo "$icon$vol%"

config-files/.local/share/themes/adw-gtk3-dark/gtk-3.0/assets/bullet-symbolic.svg

@@ -0,0 +1 @@
+<svg height="14" width="14" xmlns="http://www.w3.org/2000/svg"><g style="display:inline"><path d="M388 342c-2.207 0-4 1.793-4 4s1.793 4 4 4c2.208 0 4-1.793 4-4s-1.792-4-4-4z" style="color:#bebebe;font-style:normal;font-variant:normal;font-weight:400;font-stretch:normal;font-size:medium;line-height:normal;font-family:'Andale Mono';text-indent:0;text-align:start;text-decoration:none;text-decoration-line:none;letter-spacing:normal;word-spacing:normal;text-transform:none;direction:ltr;text-anchor:start;display:inline;overflow:visible;visibility:visible;fill:#bebebe;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:2.389;marker:none" transform="translate(-381 -339)"/></g></svg>

config-files/.local/share/themes/adw-gtk3-dark/gtk-3.0/assets/check-symbolic.svg

@@ -0,0 +1 @@
+<svg height="14" width="14" xmlns="http://www.w3.org/2000/svg"><g style="display:inline;opacity:1"><path style="color:#000;display:inline;fill:#bebebe;fill-opacity:1;stroke-linecap:round;-inkscape-stroke:none" d="M414.145 341.9a1.25 1.25 0 0 0-1.766.092l-5.68 6.305-2.881-2.909a1.25 1.25 0 0 0-1.766 1.77l4.743 4.768 7.442-8.262a1.25 1.25 0 0 0-.092-1.764z" transform="translate(-401 -339)"/></g></svg>

config-files/.local/share/themes/adw-gtk3-dark/gtk-3.0/assets/dash-symbolic.svg

@@ -0,0 +1 @@
+<svg height="14" width="14" xmlns="http://www.w3.org/2000/svg"><g style="display:inline"><path style="color:#000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000;solid-opacity:1;fill:#bebebe;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:4;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate" d="M407 367h8c1.108 0 2 .892 2 2s-.892 2-2 2h-8c-1.108 0-2-.892-2-2s.892-2 2-2z" transform="translate(-404 -362)"/></g></svg>